The 2.7mm SOP Interlocking plate is available from 3 to 20 holes in length. The 2.7mm system requires the use of bending tees during bending and twisting ( SOP Plate Bender). The hole spacing is 8mm from centre to centre of the screw holes and allows close positioning of 2 plates alongside each other and therefore position 3 screws in a 8mm fragment if necessary. Dedicated bending irons, drill guide and bending tees are necessary and are listed separately. For further information please see the SOP user guide and templates below.
No compatibility data available yet.
SKU: SOP2720
Trade pricing for veterinary clinics
Femoral Cement, Genta loaded, low viscosity, Gun application possible, 1 x 40 g for Stems
